عرض سجل المادة البسيط

dc.contributor.authorAlguhane, Tarek M.
dc.contributor.authorKhalil, Ayman H.
dc.contributor.authorFayed, M. N.
dc.contributor.authorIsmail, Ayman M.
dc.date.accessioned2017-07-12T11:45:23Z
dc.date.available2017-07-12T11:45:23Z
dc.date.issued2015-10-01
dc.identifier.urihttp://repository.taibahu.edu.sa/123456789/17986
dc.description.abstractThis paper deals with different modeling aspects of masonry infill: no infill model, Layered shell infill model, and strut infill model. These models consider the complicated behavior of the in-filled plane frames under lateral load similar to an earthquake load. Three strut infill models are used: NBCC (2005) strut infill model, ASCE/SEI 41-06 strut infill model and proposed strut infill model based on modification to Canadian, NBCC (2005) strut infill model. Pushover and modal analyses of a masonry infill concrete frame with a single storey and an existing 5-storey RC building have been carried out by using different models for masonry infill. The corresponding hinge status, the value of base shear at target displacement as well as their dynamic characteristics have been determined and compared. A validation of the structural numerical models for the existing 5-storey RC building has been achieved by comparing the experimentally measured and the analytically estimated natural frequencies and their mode shapes. This study shows that ASCE/SEI 41-06 equation underestimates the values for the equivalent properties of the diagonal strut while Canadian, NBCC (2005) equation gives realistic values for the equivalent properties. The results indicate that both ASCE/SEI 41-06 and Canadian, NBCC (2005) equations for strut infill model give over estimated values for dynamic characteristic of the building. Proposed modification to Canadian, NBCC (2005) equation shows that the fundamental dynamic characteristic values of the building are nearly similar to the corresponding values using layered shell elements as well as measured field results.
dc.language.isoenen
dc.publisherInternational Journal of Civil, Environmental, Structural, Construction and Architectural Engineeringen
dc.sourceBy Author
dc.subjectMasonry infillen
dc.subjectRC buildingsen
dc.titleModeling of masonry In-filled R/C frame to evaluate seismic performance of existing buildingen
dc.typeArticleen


الملفات في هذه المادة

Thumbnail

هذه المادة تظهر في الحاويات التالية

  • Science and Technology| العلوم والتكنولوجيا [105]
    Special collection of digital resources about Science and Technology in Medina Munuwarah from research studies and scientific literature |مجموعة خاصة من المصادر الرقمية عن العلوم والتكنولوجيا في المدينة المنورة من البحوث والدراسات والمؤلفات العلمية.

عرض سجل المادة البسيط